2 Responses to “3 Reasons You Hit The Ball Too High”

1. 

   September 4, 2019

   ALAINSOLER Log in to Reply

   High Paul
   thanks for your advices.
   I feel I hit high shots with 7 or 6 iron but relatively short (110 115 m with 7 iron). They are straight shots no slice. On the contrary with woods I feel my ball is too low especially with the driver with often big slices. Length of shots is ok for me with 5 wood (carry 150m). For driver it is horrible I am not longer than my 5 wood even when the shot is relatively straight.
   Can it be the same problem, too much weight on the back foot that generates the problems for iron and driver.
   Thank in advance for your comments
   Alain

   • 

     September 16, 2019

     Paul Wilson Log in to Reply

     Alain,

     If you are hitting the driver too low you have to be taking loft off of the club. I would think you are trying to hit the ball too hard with woods. In doing so you are simply standing up through impact hitting the bottom of the clubface.

     You need to do this:

     Topping: Watch for the Blur: https://ignitiongolf.com/watch-for-the-blur/

     You can also do it at home:

     Up In The Air Drills – Watching The Club Blur: https://ignitiongolf.com/air-drills-watch-blur/

     You really need to cure that slice. You can do that here:

     Slice:

     Step 1:

     DRILL: 3 Ways To Roll It Over: https://ignitiongolf.com/3-ways-to-roll/
     Roll Around The Stick: https://ignitiongolf.com/roll-around-stick/
     Clarifying the Roll Over Drill: https://ignitiongolf.com/clarifying-roll-drill
     Modified Roll Over Drill: https://ignitiongolf.com/modified-roll-over-drill/

     Step 2:

     After The Roll Over Drill: https://ignitiongolf.com/after-the-roll-over/
     2 Things Flatten the Plane: https://ignitiongolf.com/2-things-flatten-plane/
     See The Plane Flatten: https://ignitiongolf.com/see-the-plane-flatten/